Enhanced TDS
Identification & Functionality
- Chemical Family
- Chemical Name
- Agrochemical Functions
- Cleaning Ingredients Functions
- Fluids & Lubricants Functions
- Industrial Additives Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Agrochemicals Features
- CASE Ingredients Features
- HII Features
- Product Highlights
100% active compounds based on polydimethylsiloxane fluid (PDMS) and 2% - 60% emulsions thereof, suitable for many areas - agricultural, pool & spa, food processing, waste water, and general industrial foam control.
Applications & Uses
- Markets
- Applications
- Applicable Processes
- Fluids & Lubricants Type
- Fluids & Lubricants End Use
- I&I Cleaning Applications
- Industrial Additives End Use
- Diluting the Antifoam
This product is readily dispersible in warm or cold water with gentle agitation. For best results, mix one part of antifoam with 2-12 parts sterilized water or other diluentand stir gently until completely mixed. If itis necessary to store the diluted material,continuous, mild agitation isrecommended to ensure uniform product.
Properties
- Physical Form
- Appearance
- White liquid
- Dispersible in
- Warm or cold water with gentle agitation
- Typical Properties
Value Units Test Method / Conditions Activity 10.0 % - Weight (at 25°C) 8.3 lbs/gal - Flash Point 93.3 °C Pensky Martens Closed-Cup Viscosity (at 25°C) 700 - 1300 cps - Specific Gravity (at 25°C) 1.0 - - pH (at 1% aqueous Solution) 4.0 - 5.0 - -
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Grade
- Regulatory Information
Federal Regulation Compliance : AF 8810 complies with 40 CFR 180.910 - inert ingredients used pre- and post- harvest; exemptions from the requirement of a tolerance.
Technical Details & Test Data
- Processing Guidelines
Antifoam 8810 can be used as received or pre-diluted with water or other process liquids before use. Concentrations from 10 to 200 ppm are sufficient for foam control in most systems. In testing, to determine the most effective working concentrations, a good starting point is to add 25 parts of antifoam per million parts foamer.
Packaging & Availability
- Supplied by
Storage & Handling
- Shelf Life
- 12 months
- Storage & Handling Information
- This product exhibits excellent storage stability when proper handling procedures are followed. As with most emulsions, storage in a cool dry place (60-75°F) in tightly-closed containers will provide maximum shelf life. Under these conditions, shelf life is 12 months minimum.
- Product should be protected from freezing. Repeated freezing may damage container and may cause thickening or separation of emulsion. If freezing occurs, allow to thaw, mix thoroughly and use the emulsion as usual.