Enhanced TDS
Identification & Functionality
- Chemical Family
- Chemical Name
- CASE Ingredients Functions
- Cleaning Ingredients Functions
- Industrial Additives Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- HII Features
- Industrial Additives Features
Applications & Uses
- Markets
- Applications
- Applicable Processes
- Home Care Applications
- I&I Cleaning Applications
- Industrial Additives End Use
- Recommended Uses & Known Applications
- Detergents : Used as a detergent and wetting agent in systems using temperatures in the boiling range.
- Emulsifier : Emulsifying agent for oils, fats, and waxes.
- Paints (latex) : Used in emulsion polymerization processes.
- Wetting Agent : Wetting agent in applications involving high concentrations of electrolytes.
Properties
- Physical Form
- Appearance
- Off white, waxy solid
- Odor
- Mild, aromatic
- Insoluble in
- Mineral oil, Kerosene, Corn oil, Stoddard solvent
- Soluble in
- Water, Ethanol, Xylene, Ethylene glycol, Carbon tetrachloride, Butyl cellosolve
- Compatible with
- Anionic surfactants
- Stable in
- Bases, Acids, Salts
- Typical Properties
Value Units Test Method / Conditions Ethylene Oxide Content 20 Moles - HLB Value 16.0 - - Activity min. 99.5 % - Cloud Point (at 212°F, 1% Aqueous) Clear - - pH (at 1% in Water) 5 - 7 - - Flash Point min. 500 °F - Pour Point 90.0 °F - Specific Gravity (at 25ºC) 1.08 - - Weight (at 25°C) 8.99 lbs/gal - Hydrophobe Nonylphenol
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
Safety & Health
- Toxicity Information
- This product is regarded as non-hazardous. However, it is considered to possess low acute oral and skin penetration. It should not be used in products for internal use.
- Caution: This product causes eye irritation. Direct contact would likely result in corneal injury which might persist for a week or longer. Permanent damage is not likely to occur. However, if in contact with skin or eyes, flush with excess water and consult your physician.
Packaging & Availability
- Supplied by
Storage & Handling
- Storage, Stability and Handling Information
- It should not be mixed with concentrated oxidizing or reducing agents since the mixture of these compounds with organic compounds could form a potentially explosive mixture.
- T-Det “N” nonionic surfactants are stable non-corrosive products in an anhydrous state.
- They can be stored in plain steel tanks with piping, valves, and pumps of the same metal.
- Aqueous solutions of T-Det “N” surfactants must be stored in stainless steel or plastic lined tanks.
- The nonylphenol-ethylene oxide adducts are slightly hydroscopic. Where necessary, guard against atmospheric moisture pick-up, an inert gas blanket may be used.